SuperFOIL Shed Insulation Kit

This kit contains all the tools and accessories you need to insulate your garden shed complete with 21m² of SuperFOIL high performance bubble foil insulation. It will keep your shed warm through the winter and cooler during the summer. Quick and easy to install, with no specialist equipment required. Top-up rolls of insulation can be purchased for larger buildings- please see Shed Size Chart for details.
 
A 3 in 1 product, SuperFOIL insulation provides you with thermal insulation, a radiant barrier and a vapour control layer. Designed to be lightweight and space-saving while retaining excellent insulating properties. SuperFOIL insulation delivers protection from cold, heat, UV light and helps prevent penetrating damp and condensation. 

Fully insulates 1 7x6ft shed (walls & roof)

Contents:

• 3 Rolls 1m x 7m SuperFOIL Multipurpose Insulation
• SuperFOIL Heavy Duty Staple Gun
• 1000x 10mm heavy duty staples
• 50mm x 30m SuperFOIL Aluminium Foil Tape

Directions for use:

Installation on walls

Working internally - Start at the bottom of the shed, rolling out the insulation around the perimeter, and staple into place onto the inside edge of the frame of the shed to allow for an air gap between the panel and insulation. 

Staple approximately every 200mm to hold the product into place. 

Once you have installed the first layer of insulation, Install the second layer above using the same application methods, remembering to leave a 30-50mm overlap between the rows of insulation. 

Continue installation in this method until you have reached the top of the walls, leaving an overlap onto the roof of the shed. 

Installation on the Roof

Measure the length of the roof and cut the insulation to the correct length using a pair of sharp scissors. 

Staple the insulation into place using the studwork of the shed to allow for an adequate air gap between the insulation and roof. 

Continue to install the insulation, ensuring to leave an overlap of 30-50mm between each layer. 

Finish the insulation by taping all joints with SuperFOIL tape to ensure an airtight finish. 

Shed Size Chart:

Check if you need more insulation

Before you purchase this product, please ensure that you have enough insulation to cover your shed walls and roof. This pack has enough insulation to comfortably cover the walls and ceiling of shed sizes 6x6ft, 7x6ft or smaller.

Check the chart to the right to see if you need additional SuperFOIL Multi-Purpose Insulation or SuperFOIL Foil Tape. 

Suitable for all Shed Types and Summerhouses